How to conversion of plastic waste to fuel oil ?
Waste Tire/Plastic Pyrolysis Plant / Date:April 22, 2017
Plastic waste to fuel oil
Every year a large amount of plastic waste is discarded in the Earth. These plastic to with stand the natural process of decomposition of all. According to statistical analysis , Waste plastic generated more than 250 million tons each year. A lot of these plastic garbage is used to fill the land , which in turn may result in a waste land to create a major threat to the environment in the future. People use and dump waste plastics almost every day.
Conversion of plastic waste to fuel oil machine
1. Feed raw material plastic waste into reactor by full-automatic feeding machine. The reactor is supposed to be left 1/3 space for rotating more smoothly. Then make sure the door of feeding machine is closed.
2.Pyrolysis process: reactor will be gently heated by burning the fuel material (coal, wood, natural gas, LPG or tire oil generated from last batch). The oil gas will be released when the temperature reached 100℃(250-280℃ is the top output rate interval). Heavy oil gas separated by manifold is supposed to be liquefied and drop down into the heavy oil tank. The lighter gas will rise up to the oil condensers, be liquefied in to oil and stored in the oil tank. The incondensable gas though dusulphurization and dedust by hydroseal will be led to the furnace for recycling.
3..After all fuel oil is produced, the reactor should be cool down. Carbon black will be discharged automatically when the temperature falls down 40 degree. If the raw material is the whole tire, please take out steel wire form the reactor by hooks below 50 Celsius at least.
4.There possibly will be a little exhaust gas left, please must expel it after reaching emission standard.
5. Before starting next batch, make sure all the work has been done.
