Conversion of waste plastic to fuel oil
Waste Tire Pyrolysis Plant / Date:12-28-2020
Conversion of waste plastic to fuel oil
If all plastic waste enters the landfill, it will certainly be mined in the future, but currently all plastic waste will not enter the landfill. The United Nations estimates that four-fifths of the world’s oceans’ accumulated waste is plastic accounts. We need to stop using plastic to contaminate our oceans before too late and start collecting all the plastics that are suitable for this new, fairly simple technology that is now available. DoingGroup is a manufacturer for this technology. This technology is mainly using pyrolysis chemical reactions to conversion of waste plastic to fuel oil, carbon black, steel wire and flammable gas.
Conversion of waste plastic to fuel oil working process
1. The collected plastic waste is fed into the reactor through an automatic feeder and heat-treated.
2. When the temperature rises to about 200 degrees, oil gas would come out from the machine.
3. After the initial buffering of the oil and gas in the buffer tank, the oil and gas enters the condensing system and is liquefied into heavy oil and falls into the oil tank.
4. The carbon black produced during the combustion process is automatically discharged through the underground sealing channel when the reactor is cooled to below 40 degrees to avoid secondary pollution to the environment.
Waste plastic pyrolysis plant final produsts
The conversion of waste plastic to fuel oil was an incredible thing in the past, but now technology is very mature, and the conversion of waste plastic into fuel oil and other reusable materials is a very meaningful thing to the environment and we human being.
Used of technical conversion of waste plastic to fuel oil
| Technical parameter of conversion of waste plastic to fuel oil | ||||
| No. | Items | Contents | ||
| 1 | Equipment type | DY-1-6 | DY-1-8 | DY-1-10 |
| 2 | Raw material | Waste plastic | Waste plastic | Waste plastic |
| 3 | Structural form | Horizontal rotation | Horizontal rotation | Horizontal rotation |
| 4 | 24-hour Capacity | 6 ton | 8 ton | 10 ton |
| 5 | Oil yield | 2.7-3.3ton | 3.6 -4.4ton | 4.5 -5.5ton |
| 6 | Operating pressure | Normal | Normal | Normal |
| 7 | Material of pyrolysis Reactor | Q245R | Q245R | Q245R |
| 8 | Thickness of pyrolysis Reactor | 16mm | 16mm | 16mm |
| 9 | Rotate speed of pyrolysis Reactor | 0.4turn/minute | 0.4turn/minute | 0.4turn/minute |
| 10 | Total power | 19KW | 19KW | 19KW |
| 11 | Mode of cooling | Water cooling | Water cooling | Water cooling |
| 12 | Cooling area of condenser | 100sqm | 100sqm | 100sqm |
| 13 | Kind of transmission | Internal gear drive | Internal gear drive | Internal gear drive |
| 14 | Noise dB(A) | ≤85 | ≤85 | ≤85 |
| 15 | Size of Reactor(D×L) | 2200×6000 | 2200×6600 | 2600×6600 |
| 16 | Working form | Intermittent operation | Intermittent operation | Intermittent operation |
| 17 | Delivery time | 20days | 20days | 20days |
| 18 | Weight | 27T | 30T | 35T |
| Prepared by customer about conversion of waste plastic to fuel oil | |||
| No. | Item | Consumption | |
| 1 | Coal(for choice) | 500kg/day | |
| 2 | Wood(for choice) | 800kg/day | |
| 3 | Natural gas(for choice) | 100-150kg/day | |
| 4 | Oil(for choice) | 300-350kg/day | |
| 5 | Electricity | 244kwh/day | |
| 6 | Water(recycled) | 60㎥ /month | |
| 7 | Total power | 19kw | |
| 8 | Land area | 35m*15m | |
The product obtained from the conversion of plastic waste into fuel oil has a very wide range of uses in life, and its specific uses are as follows:
Fuel oil usage
Carbon black usage
4. Combustible gas: It will be recycled by the equipment and used again for the heating fuel in the reactor, which is energy-saving and environmentally friendly.
