Home > FAQ > Waste Tire/Plastic Pyrolysis Plant>How do we ensure the safety of our tire recycling machine in production?
How do we ensure the safety of our tire recycling machine in production?
Waste Tire/Plastic Pyrolysis Plant / Date:February 6, 2018
How do we ensure the safety of our tire recycling machine in production?
1. What production standard we’re using for manufacturing the tire recycling machine?
As we know there is oil gas produced in pyrolysis process, so there may be pressure generated when wrong operation. To eliminate the safety risks, we make tire recycling machine strictly according to the standard of pressure vessel (boiler grade). The ellipsoidal head is an obvious symbol for pressure vessel. Because the reactor with ellipsoidal head has a strong tension and buffering when pressure generated. And it can better connect with the reactor body, therefore cannot be easily cracked under high pressure.
Boiler head of reactor
2. What kind of steel plate we’re using for making the tire recycling machine?
Since we’re making the boiler grade machine, of course we use boiler plate as raw material for the production. Through our experiences and the study, Q245R boiler plate is the best option for making tire recycling machine.
3. How thick is the steel plate we’re using for tire recycling machine production?
For tire pyrolysis machine, we need to heat it for pyrolysis tires to oil gas. If the plate is too thicker, the heat transfer will be greatly reduced, thus bring down the heating efficiency. Too thinner, it will be easy cracked after long term heated by high temperature. After years of experiences that 16mm plate is the best.
Size
4. How do we ensure the good quality of the steel plate?
As we know that there are many suppliers in the market for providing this plate. How do we know the quality of their plate is good or not? So before production, we must make the raw material test to ensure it can meet our demand. Below are the testing devices for the steel plate in our lab.
As we know that there are many suppliers in the market for providing this plate. How do we know the quality of their plate is good or not? So before production, we must make the raw material test to ensure it can meet our demand. Below are the testing devices for the steel plate in our lab.
Technical equipment
5. How can we cut plate accurately for better welding?
To cut the steel pate accurately for better welding, we use plasma digital cutting machine which can be controlled by PLC. And after accurate cutting, the plate edge will be very neat for better welding. For welding, we use auto-welding machine, which can make the welding seam stronger than normal welding.
To cut the steel pate accurately for better welding, we use plasma digital cutting machine which can be controlled by PLC. And after accurate cutting, the plate edge will be very neat for better welding. For welding, we use auto-welding machine, which can make the welding seam stronger than normal welding.
Auto-welding machine
Auto-welding machine 02
Welding details
Drawing
Auto-welding machine 02
Welding details
Drawing
6. How to ensure the welding seam is good enough?
After welding, we can see the welding appearance is very good. But how to know the welding seam is good or not. For us, we use X-ray detection for checking the welding seam after welding. We can see clearly if there are small pores inside the seam by X-ray detection. Even there is a very small pore, we’ll re-do it. By now we’re the first tire recycling machine manufacturer who has this technology. To operate the X-ray detection, the workers should get the operation licence.
X-ray detecting for check
